Troubleshooting; Errors; Error Codes - Pluggit ARPRC Manuel D'utilisation Et D'installation

3.12. TROUBLESHOOTING

3.12.1. Errors

Error
Synchronising the remote control no longer functions.
Cause
The distance to the control unit of the room ventilation
system is too great.
The remote control has already been synchronised with an-
other room ventilation unit.

3.12.2. Error codes

Note:
If an error code is displayed, contact the customer
service of the specialised company.
Code Alarm/error
E1 Exhaust air ventilator
E2 Supply air ventilator
E3 Bypass flap
E4 Outdoor air temperature sensor (T1)
E5 Supply air temperature sensor (T2)
E6 Exhaust air temperature sensor (T3)
E7 Outgoing air temperature sensor (T4)
E8 Indoor air temperature sensor (T5)
E9 Humidity sensor (accessories)
Is located in the exhaust air duct of the room ventilation unit
E10 Outdoor temperature <-13 °C
E11 Supply air temperature <15 °C
E12 Fire alarm if one the temperature sensors measures a temperature above 70 °C.
E13 Communication error
E14 Fire alarm, triggered by the fire detector (accessory) installed in the duct
E15 VOCs sensor (accessories)
18
OI remote control for Pluggit Avent
Correction
Reduce distance.
Reset remote control, see page 5.