Selecting Ventilator Level Manually; Switching On/Off Holiday Mode; Setting, Switching On/Off Night Setback - Pluggit ARPRC Manuel D'utilisation Et D'installation

3.5.

SELECTING VENTILATOR LEVEL MANUALLY

You can choose between ventilator level 0-4.
The ventilator level 0 is a stand-by mode and can be turned
on for a maximum of 1 hour.
The ventilator level can only be turned on for a maximum of
4 hours.
After the time has expired, the room ventilation unit auto-
matically switches back to the last operating mode.
2
RH%
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (1) at the right until the
display (2) illuminates.
3. Press centre of button (1).
4. Repeatedly press button (1) at the right until the desired
ventilator level (3) is selected.
3.6.

SWITCHING ON/OFF HOLIDAY MODE

During periods when the building is unoccupied and is not
used for other purposes, the holiday mode can be switched
on.
In holiday mode, the room ventilation unit runs at a min-
imum level. This means that 2/3 of the time
ventilator level 1 (protection against moisture) and 1/3 of
the time ventilator level 0 are switched on.
2
RH%
Switching on
1. Press the centre of button (1) to activate the operating
mode line. The current operating mode flashes.
2. Repeatedly press button (1) at the right until the
display (2) illuminates.
Switching off
Switch off holiday mode as soon as the building is
used again, otherwise moisture damage may
result.
Press the centre of button (1).
The display (2) turns off.
1
Note:
Die Wohnraumlüftung
The holiday mode is automatically switched off after
28 days. The room ventilation unit automatically
switches back to the last operating mode.
3
3.7.
M+P-26A-0971
With the night setback switched on, the room ventilation
unit runs at ventilator level 1.
This feature can be switched on and off with the automatic
programme, when manually operated and with the preset
weekly programme.
Switching on
1. Press the centre of button (1) to activate the operating
2. Repeatedly press button (1) at the right until the
1
Die Wohnraumlüftung
3. Press centre of button (1).
M+P-26A-0972
Warning:

SETTING, SWITCHING ON/OFF NIGHT SETBACK

2
RH%
3
mode line. The current operating mode flashes.
display (2) starts flashing.
The setting is saved.
OI remote control for Pluggit Avent
1
Die Wohnraumlüftung
M+P-26A-0973
13