Recharging The Battery - Wagan Tech Brite-Nite 2 Million LED Spotlight Lantern Guide D'utilisation

Masquer les pouces Voir aussi pour Brite-Nite 2 Million LED Spotlight Lantern:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

RECHARGING THE BATTERY

1. Slide the switch at the back to the "CHARGE" position, revealing the
charging port.
2. Attach micro-USB cord to charging port. Charge with any USB power
source, AC wall adapter, or supplied DC adapter.
3. Check the Battery Level Indicator LEDs at the back of the light to see the
charge level while charging.
4. Do not turn on spotlight while charging.
5. The battery will be fully charged about an hour after the green Battery
Level Indicator light is lit. It takes roughly 4–6 hours to charge with the DC
adapter (estimated time: please see the Battery Level Indicator for actual
charge level).
MAINTENANCE
Keep the spotlight clean and dry.
The lifespan of the internal battery depends on how well it is treated. It is
advisable to recharge the spotlight after use, in order to extend battery life.
If not used for an extended period of time, check battery level after 3
months. Recharge as necessary.
Do not throw used batteries into the garbage can: Check with your local
recycling center for proper disposal.
Wagan Tech and wagan.com are trademarks of Wagan Corporation.
User's Manual—Read before using this equipment
©2019 Wagan Corporation. All Rights Reserved.
4

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

2484-8

Table des Matières