Urmet BN 3000/403 Guide Rapide page 5

ENGLISH
1- Compliant with IEEE802.3at/af standard
2- CE certificate
The 3000/403 (PoE+ Switch) provides power supply to IP cameras via Cat5/Cat5e
cables, has 16 x10/100 Mbps PoE+ (IEEE 802.3af/at) ports, 2 x 10/100/1000 Mbps
RJ45 uplink ports and 1 x 1.2 gigabit SFP combo port (ports 18 and 19 cannot be
used simultaneously). If there is no communication when connecting the switch via
port 19, it is necessary to move the EXTEND dip-switch and then return it to the
desired state.
The 3000/403 is a 16-port unmanaged PoE+ Ethernet switch. The 3000/403 can
simultaneously transmit data and power to a network node. In tests, the 3000/403
was found to be suitable for powering 802.3af/at terminals without causing damage to
the connected equipment, providing up to 30 watts on a single port. The 3000/403
significantly reduces additional electrical wiring costs for powering remote network
devices such as: wireless LAN access points, video surveillance cameras, etc.
An advanced self-adaptive algorithm allows only PD terminals to be powered, without
the risk of causing damage to connected equipment. The power supply will be
interrupted when the POE equipment is not connected. The 3000/403 automatically
identifies POE requirements, speed, duplex and uses Auto Uplink TM cables.
•
Supplies power to surveillance cameras and wireless APs via Cat5 cable or
higher.
•
IEEE802.3af/at standard power supply for 1~16 ports
•
Compliant with IEEE 802.3i 10 Base-T and IEEE 802.3u 100Base-TX
standards
•
Flow control: IEEE 802.3x full-duplex standard and half-duplex backpressure
standard
•
10/100Mbps auto-adaptive RJ45 ports
•
Transmission distance up to 100m, up to 250m when EXTEND function is
activated (When EXTEND function is activated, VLAN function is
automatically activated as well, i.e. the switch does not route packets
Specifications
Description
Features and Advantages