Backlight; Software Upgrade; Factory Reset; Software Version - RuarkAudio R1 Guide De L'utilisateur

System settings
To change system settings press and hold INFO/MENU .
Use ▼▲ to select 'System' and press OK to confirm.

Backlight

The backlight automatically adjusts
to suit ambient light but you can also
set it to 'time-out' and switch off. We
recommend this setting is activated
when R1 is used with its optional
battery pack (BackPack) to give best
battery life.
1. In 'System' menu, use ▼▲ to
select 'Backlight'. Press OK to
confirm.
2. Use ▼▲ to cycle through options.
Press OK to confirm.

Factory reset

Reset to default factory settings.
1. In 'System' menu, use ▼▲ to
select 'Factory reset'. Press OK to
confirm.
2. Use ▼▲ to select 'Yes' or 'No'.
Press OK to confirm.

Software upgrade

This facility is for factory and dealer
use only. Its primary function is to
allow customisation for applications
such as Hotel use etc.
1. In 'System' menu, use ▼▲ to
select 'Software upgrade'.
Press OK to confirm.
2. Use ▼▲ to select 'Yes' or 'No'.
Press OK to confirm.

Software version

Use this function to view the
Model Software version.
In 'System' menu, use ▼▲ to select
'Software version'. Press OK to
confirm.
Did you know you can press INFO/MENU
at any time to return to previous step?
EN
11