Dicota Freelance Pro Guide D'utilisation page 3

setting of Tax rate, press the Fn key
with Tax– or Tax+ key; the calculation
result will be changed.
Tax – Price-less-tax calculation.
Tax + Price-plus-tax calculation. When Num
Off, the input symbol will be "=".
Special Function:
Normally, when users input numbers from a USB
keypad, the Notebook's Num Lock function will be
enabled as well. Users have to disable Num Lock
function before inputting characters from a Note-
book. The enable and disable process will always
showing every time when users input numbers from
a keypad and it is cumbersome for all the users. If
users want to solve this problem, they need to in-
stall a driver. But our new keypad has no synchroni-
zed problem; users can use the keypad and input-
ting characters from a Notebook at the same time.
Especially, it doesn't need any drivers and support
Plug & Play. Users just need to plug it into the USB
port, and then users can use it smoothly. This new
wireless keypad also can use under PC or MAC
without any driver. It can detect the PC mode or
MAC mode automatically, no other steps are needed.
About the Display
The display shows the number you input, calculation
results, and various indicators showing the status
of the calculator.
– MINUS Negative value indicator
MEMORY Independent memory indicator
ERROR Error indicator
' 3-digit separator (apostrophe)
CALC Indicate you are in calculator
status
KEYPAD Indicate you are in keypad
status
GT Grant total
CUR Price-multiply-CUR calculation
EURO Price-multiply -EURO calculation
Rounding Selector & Decimal Place Selector
⇒ Use DEC key to rounding Selector
Specified the rounding system.
F Floating decimal point system, which
displays the value without rounding.
0,2,4 Number of decimal places for the
5/4 setting of the Rounding Selec-
tor.
A The "Add Mode" automatically adds
a decimal point and two decimal
places to all values, even if you don't
input a decimal point. This mode is
very useful when performing calcula-
tions in dollars or other monetary
systems that require two decimal
places. Two decimal places are not
added in this mode if you press the
DEL key while inputting a value, or
for any operation other than addition
and subtraction.
Setting EURO and CUR Function:
€
CUR and : Press CUR or
"CUR" or "Euro" indicator on the LCD will start flash-
ing. Input your desire parameter then press CUR or
€
key again. The "CUR" or "Euro" indicator will dis-
appear; it means the setting is accomplished.
When LCD displays "0", you can press the "CUR"
and "Euro" to enable or disable the indicator on the
LCD. When the numbers display on the LCD, press
the "CUR" or "Euro" button, and then it will exchan-
ge to the currency or tax rate.
For example: Supposing the CUR parameter is 34
and the Euro parameter is 105; the calculation re-
sult is 180.
The "CUR" or "Euro" indicator display on the
LCD: Press CUR key, then the calculation result will
be 6120 (180*34). Press Euro key, then the calcu-
lation result will be 18900 (180*105).
The "CUR" or "Euro" indicator didn't display on
the LCD: Press CUR key, then the calculation result
will be 5.29 (180/34). Press Euro key, then the
calculation result will be 1.71 (180/105).
Setting Tax Function:
Press "%" key for 1~1.5 sec, the "TAX" indicator on
the LCD will start flashing. Input your desire para-
meter then press "%" key again. The "TAX" indicator
will disappear; it means the setting is accomplished.
For example: Supposing the Tax parameter is 10
and the calculation result is 180.
Press Fn & Tax+ key, then the calculation result will
be 198 (180*(1+0.1)).
Press Fn & Tax– key, then the calculation result will
be 163.64 (180/(1+0.1)).
€
key for 1~1.5 sec, the