Dicota Freelance Pro Guide D'utilisation page 2

english
Introduction
Congratulations on your purchase of the Freelance
Pro.
This new wireless numerical keypad with calculator
combines special Tax, Euro and Currency rate cal-
culating functions. It makes the calculation process
easier and more convenient.
System Requirements
• Microsoft ® Windows
MAC OS X compatible.
• One USB v. 1.1 or 2.0 compliant port.
Installation
Connection with Windows
1. Plug the USB receiver connector to your PC.
2. The Add New Hardware Wizard appears.
3. Click Next. The locate driver screen appears.
4. Select "Search for the best driver for your device
(recommended)", and then click Next. The wizard
searches for the appropriate device driver.
5. Click Finish to complete the driver installation.
You are now ready to begin using your wireless
keypad.
Windows ® 2000/XP Operating System
1. Plug the USB receiver connector to your PC.
2. The Found New Hardware Wizard appears and
the OS will install the driver automatically. No
other steps are necessary.
You are now ready to begin using your wireless
keypad.
MAC OS X
1. Connect the keypad to your MAC.
2. The MAC OS will install the driver automatically.
No other steps are necessary.
You are now ready to begin using your keypad.
Using the wireless calculator keypad.
Turning the keypad Off and On
To turn on the keypad, press the CE/AC key, locat-
ed directly above the number seven key. The keypad
starts in keypad mode and displays "0". The keypad
will automatically go to suspend mode after four
minutes of non-operation under calculator mode.
You can press CE/AC key to wake up. Or you can
press the CE/AC key two seconds under calculator
mode to turn it off.
® 98/ME/2000/XP or
® 98/ME
ID setting
Plug the receiver into your Notebook's USB port and
turn on the wireless keypad. The keypad and the
mouse will connect with the receiver automatically.
If not, press the ID button at the back of the keypad,
then the ID setting is accomplished. Repeat the
same step for the mouse ID setting.
• Description of the function keys
Key
Functions
M+ Adds the current display to the con-
tent of memory.
M– Subtracts the current display from
the content of memory.
MRC I. First push, as MR key, transfers
the contents of the memory register
into the display register.
II. Second push, as MC key, clears
the memory.
DEC Cal mode: Specifies the number of
decimal places for rounding.
Keypad mode: As the keyboard Tab
function.
+/– Switches the sign of the displayed
value between positive (+) and nega-
tive (–).
% I. Use this key in combination with
arithmetic operator keys to perform
percent.
II. Setting TAX rate.
€
I. Setting Euro rate.
II. In keypad mode, can input "
bol.
CUR Setting currency and exchange rate.
√
Extracts the square root of a positive
number displayed in the entry regis-
ter.
MODE Change mode between the calculator
and the keypad status.
SEND Send the calculation result to PC
when the device is in calculator mode
or in keypad mode.
Fn Combination key with Tax– and Tax+
function. When you completed the
Definition
€
" sym-