Description Of The Appliance; Control Panel - LIMIT LIDD161 Manuel D'instructions

ventilation, follow the instructions relevant
to the installation.
Wherever possible, the back of the
product should be against a wall to avoid
touchin g or catching warm parts
(compressor, condenser) and to prevent
the risk of fire; follow the instructions
relevant to installation.
The appliance must not be located close
to radiators or cooking appliances.
Make sure that the main plug is accessible
after installation of the appliance.

Description of the appliance

View of the appliance
1. bulb & temperature regulator
2. Storage shelf.
3. Crisper
4 Lower drawer in freezer
5. Adjustable feet
6. Lower door shelf
Due to continual modification of our products, your refrigerator may be slightly different
Note:
from this Instruction Manual, but its functions and usage methods remain the same.

Control panel

Starting up and temperature regulation
Insert the plug of the connection lead into
the plug socket with a protective
grounding contact. When the refrigerator
compar-ment door is opened, the internal
lighting is switched on.
The temperature selector knob is located
on the top of the refrigerator compartment.
Setting "OFF" means
Off .
Turning in a clockwise direction the refrigerating
unit turns on it will then operate
3
Service
1) If the appliance is Frost Free.
2) If the appliance contains a freezer compartment.
Setting "MIN" means
Highest temperature, warmest setting.
Setting "MAX" (end-stop) means
Lowest temperature, coldest setting.
Important! Normally, we advise you select
a setting
temperature higher or lower, please turn the
knob to a warmer or colder setting
accordingly. When you turn the knob to a
cold
efficiency. Otherwise, it would result the
consumption of energy
automatically.
Any electrical work required to do the
servicing of the appliance should be
carried out by a qualified electrician or
authorized person.
This product must be serviced by an
authorized service center, and only
genuine spare parts must be used.
; if
" MED "
er setting, this can lead to more energy
you want the
.