Publicité
Les langues disponibles
Les langues disponibles
US
Controls and connections
1. Power : Click once to turn on the unit. Click
UK
again to turn off the unit
2. Source selection : Bluetooth. Click once to
switch on the Bluetooth input. If the unit doesn't
find any available device already paired, it goes
to paring mode automatically. Click and hold 2
seconds to force BT pairing.
3. Source selection : AUX. Click once to switch on
the AUX input (3,5mm Jack at the back - #13).
4. Source selection : microSD card. Click once
to switch on the SD input (microSD at the back
- #14). A microSD card must be inserted with
proper tracks to work fine.
5. Volume Down : Click once to decrease the
volume one step. Click and hold for quick
volume Down.
6. Play/Pause (BT & SD) : Click once to Play or
Pause, double click for Next Track, triple click for
Previous Track.
7. Volume UP : Click to increase the volume one
step. Click and hold for quick volume UP.
Remote control
8. Blue Power LED : Will flash quickly when
battery charge is low, will flash slowly
when charging, and will stay solid blue
when charging is complete.
9. Bluetooth LED : Blue when BT is on.
10. AUX LED : Blue when AUX is on.
11. SD LED : Blue when SD is on.
12. Power Supply connector : Connect the
Power supply when the LED #8 is flashing
blue quickly.
13. AUX Input : connect your analogical
device here and click #3 to listen to it.
14. microSD card slot : Insert your microSD
card in the right direction (see drawing)
and click #4 to listen to it.
15. USB charger : Use this port to charge
any USB device (your cell phone for
example). It works with or without the
main power adaptor connected.
Power OFF : Click once to turn off the unit.
Skip Back (BT & SD) : Click to go
To turn on the unit, push Power on the
back track by track.
main unit.
Play / Pause (BT & SD) : Click
Source selection : Bluetooth.
once to Play, click again to Pause
Click once to switch to Bluetooth input. If
the track.
the unit doesn't find any available device
already paired, it goes to paring mode
Skip Forward (BT & SD) : Click to
automatically. Click and hold 2 seconds to
go to the next track.
force BT pairing.
SD Shuffle (SD) : Click once to
Source selection : AUX. Click once to
play the tracks on the SD card in
switch to AUX input (3,5mm Jack at
shuffle mode.
theback).
SD Alphabetical (SD) : Click once
Source selection : SD. Click once to switch
to play the tracks on the SD card
to SD input (microSD at the back).
in alphabetical order.
Volume UP : Click once to increase the
Bass UP : Click once to increase
volume one step. Click and hold for quick
the bass level.
volume UP.
Bass Down : Click once to
Volume Down : Click once to decrease the
decrease the bass level.
volume one step. Click and hold for quick
volume Down.
microSD card adaptor
microSD card
not included
The microSD card is designed to store a large
quantity of your favorite tracks. You don't need
any Bluetooth connexion to play the tracks
located on the microSD card.
1. Introduce the microSD card in the included
adaptor. The adaptor becomes a USB key.
2. Connect the adaptor with the microSD card
on a computer.
3. On Mac or on PC, the microSD adaptor will
show up like a USB key.
4. Drag and drop your favorite records and tracks
in mp3 or Flac format on the key/SD card.
5. Eject/Remove it, take the microSD card and put
it in the iP3 slot located at the back of the unit.
6. On the iP3, push Power, push SD and enjoy
your favorite tracks
Important : The microSD card format can be
FAT32 or exFAT. The tracks format can be mp3 or
FLAC (up to 16 bits 44KHz).
Publicité
