Domo MS171 Mode D'emploi page 19

Masquer les pouces Voir aussi pour MS171:
Table des Matières

Publicité

Les langues disponibles

Les langues disponibles

www.domo-elektro.be
MS171
PARTS (fig. A)
1. On/out switch
2. Machine cover
3. Thickness indicator
4. Knob (dial) for adjusting thickness
5. Hand protection
6. Finger/thumb protection
7. Sliding carriage
8. Safety switch
9. Support platform
10. Screw for fastening the blade
11. Blade
12. Foldable carriage
13. Food carriage
FOR FIRST TIME USE
TAKE CARE: It is important to read the instruction manual carefully beforehand.
Pay strict attention to the safety instructions.
Always remove the plug from the mains socket before adding or removing parts or
cleaning.
ASSEMBLY FINGER/THUMB PROTECTION (fig b)
Place the finger protection (6) perpendicular to the opening in the
sliding carriage (7) and press firmly.
ASSEMBLY SLIDING CARRIAGE (fig c)
Place the markings on the sliding carriage (7) on the markings
indicated on the foldable carriage (12) and press the sliding
carriage down. Carefully check the sliding carriage to make sure it
is secured properly.
ASSEMBLY HAND PROTECTION (fig d)
Push the hand protection (5) against the top of the sliding carriage
(7).
TAKE CARE: it is only safe to remove the hand protection if
the foodstuff that you wish to slice is longer than 15 cm. If using
the appliance without the hand protector then extra care must
be taken. Always keep your fingers/thumb well away from the
rotating blade.
19

Publicité

Table des Matières
loading

Table des Matières