Brewista Artisan BAVTK2 Série Guide De Démarrage Rapide page 5

• Auto Brew Function
(Refer to owner's manual for detailed Auto Brew instructions.)
Note: The Auto Brew time is the time at which the heating cycle will be complete.
• Press and hold the Auto Brew icon for 3 seconds.
• Press the [ + ] icon, [ – ] icon, or Temperature Setting icon to set of
select the desired Auto Brew temperature.
• Set the Auto Brew time:
- Press the Auto Brew icon again. The Auto Brew time on the right
side of the LCD Readout will have the hour digit(s) flashing.
- Press the [ + ] or [ – ] icons to change the hour portion of the
Auto Brew time.
- Press the Auto Brew icon again and the minutes portion of the
Auto Brew time will flash.
- Press the [ + ] or [ – ] icons to change the minutes portion of the
Auto Brew time.
• Timer Feature
• Press the Timer icon to enter timer mode. The LCD will display
"0:00".
• Press the Timer icon again to start the count-up timer.
• Press the Timer icon again to stop the timer. Press the Timer icon
again to reset.
• To access the count-down timer, press and hold the Timer icon
until the minutes digits flash. Refer to page 11 of your Owner's
Manual for instructions on setting the count-down timer.
• To reset the timer to zero, press the Timer icon once more.
• Set the Current Time:
- After setting the Auto Brew Time (see above), press the Auto
Brew icon. The hour of the current time will flash on the left
side of the LCD readout.
- Press the [ + ] or [ – ] icons to change the hour portion of the
current time.
- Press the Auto Brew icon again and the minutes portion of
the current time will flash.
- Press the [ + ] or [ – ] icons to change the minutes portion of
the current time.
- Once the Auto Brew Time and current time are correct, wait
for 3 seconds for these times to be stored.
• To activate the Auto Brew function, press the Auto Brew icon
one time. The Auto Brew icon will light up.
• Smart Boil Function
• Press the Smart Boil icon. The Smart Boil function brings
the water to boiling temperature as quickly as possible.
• Once the kettle's water has reached boiling temperature
(varies based on your altitude), you will hear 3 beeps and
the Smart Boil function will stop.
• The Actual Temperature inside the kettle will be displayed
for 10 minutes before the kettle enters Sleep Mode.
• To stop the Smart Boil function, press the Smart Boil icon or
Power icon at anytime during the cycle.
EN