Setting Up The Kettle; First Time Use - Brewista Artisan BAVTK2 Série Guide De Démarrage Rapide

• Layout
1) Spout
2) Lid
3) Vent Holes
4) Handle
5) Max & Min water level indicators
(inside kettle)
6) Kettle Body
7) Base
8) Mode icon display
9) Target Temperature
10) LCD Readout
11) Actual Temperature
12) Power icon
13) Smart Boil icon
14) Timer icon
15) Keep Warm icon
16) Auto Brew icon
17) Temperature Setting icon
18) [ – ] icon
19) [ + ] icon
20) Removable power cord with plug

• Setting Up the Kettle

• Set the base on a flat, steady surface and attach the female end
of the removeable power cord to the base.
• Plug cord into a grounded wall outlet. Refer to the SAFEGUARDS
sections at the beginning of your owner's manual for more details
before plugging in your kettle.
2
1 3

• First Time Use

• Fill the kettle to the Max fill line (0.9 L) (marked inside of kettle)
with cold water.
IMPORTANT!
• Replace the lid with vent holes facing away from the handle
and place kettle back on its base.
• Press the Power icon to turn the kettle on and then press the
Smart Boil button to start boiling automatically.
• Bring water to a boil, then empty the kettle.
WARNING:
is not recommended and may damage the kettle. Refer to
the "High Altitude Users" section in the owner's manual to
determine the boiling temperature for your altitude.
• Allow the appliance to cool down for 1 minute.
• Repeat twice before initial use.
8
12
13
4
14
5
6
7
Do not fill above the "max" fill line (0.9 L).
Setting the temperature above the boiling point
10
9 11
19
C C
F F
pm
am
pm
am
18
15 16 17
C C
F F
pm
am
pm
am
20
EN