Sony PlayStation Mode D'emploi page 38

38
C
!¢
!§
US
C Additional
!∞
To change the size of the image
Press the directional buttons (up or
down) while holding down the ✕
button.
To change and store the settings
1
!¶
2
3
Note
Do not unplug the analog controller
(DUALSHOCK
Enjoying SoundScope (continued)
operations
During playback, press the R1
button while holding down the
✕ button.
A round mark flashes on the
lower right of the screen (C!¢).
Operate the analog controller
(DUALSHOCK ).
®
While the round mark is
displayed, any changes you
make to the SoundScope
operation are stored.
When you are finished, press
the R1 button while holding
down the ✕ button.
The round mark disappears and
the procedure is completed.
) during these procedures.
®
To switch to stored settings
1
During playback, press the L1
button while holding down the
✕ button.
A round mark appears on the
lower left of the screen (C!∞),
and the SoundScope image is
transformed by the stored
operation.
2
Press the L1 button while
holding down the ✕ button.
The round mark disappears and
the procedure is cancelled.
Tip
Your stored setting is lost when you turn
off the PS one™ console. If you want to
keep the data, you can save and load it
using a memory card with one memory
block.
(continued)