Table des Matières
Publicité
Les langues disponibles
Les langues disponibles
INSTALLATION INSTRUCTIONS
Install Pedestal
Follow these instructions to install the pedestal on the All-In-One
Washer and Dryer.
1. Lay the All-In-One Washer and Dryer on its side.
2. Remove the feet from the bottom of the All-In-One Washer
and Dryer.
3. Screw the feet into the bottom of the pedestal.
4. Screw the bolts into the bottom of the All-In-One Washer
and Dryer.
5. Slide the pedestal onto the All-In-One Washer and Dryer
by engaging the bolts in the slots located on the top of the
pedestal.
6. Stand the All-In-One Washer and Dryer up.
7. Use a 5/8" (16 mm) open-end wrench to completely
tighten the bolts.
8. With the All-In-One Washer and Dryer locked securely into
place on the pedestal, slide the All-In-One Washer and Dryer
with pedestal to its final location.
3
Publicité
Table des Matières
