Connecting A 12-Pole Plug Connector - Calira EVS 17/07-DS/IU Mode D'emploi

EVS17/07-DS/IU und EVS17/12-DS/IU

Connecting a 12-pole plug connector

23
19 27
18 22 26
17 21 25
16 20 24
The fuses must be positioned close to
Position the fuses close to the positive poles of the batteries and to the D+ of the
generator.
Insert the plug connector into the socket provided on the device (Fig. 2). The
plug connectors can only be inserted and locked into the correct socket and in
the correct position. Make sure that the locking engages securely. To withdraw
the connector plug, the locking must be released by pressing the two wings
together.
16
17
18
19
20
21
22
23
24
25
26
27
The fuses serve to protect the circuits.
Do not use higher fuse values: fire hazard!
34
Trautmann GmbH & Co. KG
Lerchenfeldstr. 9
Operating instructions
The illustration (Fig. 9) shows the contacts available in the
12-pole plug connector. Connect the 12-pole plug conne-
ctor to the generator, starter battery and supply battery in
accordance with the connecting diagram.
Make sure that the contact pins engage securely with the
plug connector! Loose contact pins can lead to malfunc-
tions or short-circuiting.
Fig. 9: 12-pole connector
the positive poles of the batteries!
2
4mm
2
0,75mm
2
0,75mm
2
6mm
2
4mm
2
6mm
Fig. 10: Connecting diagram 12-pole plug connector
87600 Kaufbeuren
Internet: http://www.calira.de
+ Charging current red
D Generator brown
+
B+ Measuring cable/Test
+ Supply
red
minus blue
red
_
+
l
Battery 12 V Battery 12 V
(start)
CALIRA
Tel.08341/9764-0 Fax 08341/67806
Email: info@calira.de
2A
red
_
+
ll
(supply)
-Apparatebau