Funtek IModel FTK-23504 Manuel D'utilisation page 5

DECLARATION OF CONFORMITY
Declares that he following product : Remote control model Crawler Mode
Imodel SARL declares that the radio equipment type 500404197 conforms to Directive 2014/53/EU.
The submitted products have been tested by us with the listed standards and found in compliance with the following European Directives:
The RED Directive 2014/53/EU
EN 60950-1:2006 + A11:2009 + A1:2010 + A12:2011 + A2:2013
ETSI EN 301 489-1 V2.2.3:2019
TSI EN 301 489-3 V2.1.1:2019
ETSI EN 300 440 V2.2.1:2018
EN 62479:2010
Date of issue: August 4, 2020
i.A.
TRANSMITTER INTRUCTIONS
A. Power Switch
B. Steering Trim
C. Power setting
D. BIND / Steering reverse / EPA
Item # FTK-23504
This product must not be disposed of with other waste. Instead, it is the user's
responsibility to dispose of their waste equipment by handing it over to a
designated collection point for the recycling of waste electrical and electronic
equipment. The separate collection and recycling of your waste equipment at
the time of disposal will help to conserve natural ressources and ensure that
it is recycled in a manner that protects human health and the environment.
Help us to protect the environment and respect our ressources !
NEUTRAL
1. Forward
3. Left
1. Remove the battery cover on the bottom of the transmitter
2. Install 4x1.5V AA batteries (not included) in correct polarities
3. Close the battery cover
NOTICE!
1. When installing batteries, please be sure to match the
polarities labeled on the battery holder.
2. Do not mix old and new batteries.
3. Do not mix different type of batteries.
- 5 - - 5 -
2. Backward
4. Right