Table des Matières
Publicité
STEP 14
1. Slide drawer into cabinet by sliding drawer
slider (M) into grooves on drawer left side
panel (15) and drawer right side panel (16).
Pull drawer out and adjust drawer sliders (M)
to be fully extended against drawer front
board (13). Insert 2 machine screws (N)
through holes on drawer left side panel (15)
and drawer right side panel (16), then tighten
to drawer sliders (M).
N
N
STEP 15
P
P
P
P
8
1. Insert 8 shelf holders (P) into holes on
lower left side board (8) and lower right
side board (9), make sure each 4 shelf
holders (P) are at same level.
2. Place adjustable shelves (7) onto shelf
holders (P).
P
P
7
P P
7
Publicité
Chapitres
Table des Matières
