Mato ELC 6 Mode D'emploi page 8

Safety Instructions:
Non-compliance with the safety instructions can result in danger both to persons and to the
environment and the
to the loss of any claims for damages. The operator
the contents of the Operating Instructions, particularly the Safety Instructions are known to
the operating personal.
- When the unit is not in use turn off the pump at the master switch.
Do not allow the pump to run for more than 1-2 min. against a closed gun.
-
Be aware that this will heat up the pump.
-
The unit must not be operated with the reservoir lid opened.
-
Filling or reaching in during operation (with the agitating blade running) is not allowed.
-
The equipment must not be used in potentially explosive areas.
-
Media in Hazard Class A1 and A2 must not be pumped.
-
The setting of the pressure-limiting valve must never be altered.
-
F
Never point the lubrication gun at people or animals! Danger of injury!!
Before any repair or maintenance work, cut off the power supply (pull out the mains plug) and
-
depressurise the unit.
Make a regular check on the pressurised components (pressure hose and lubrication gun) and
-
also on the live parts of the pump for possible damage.
Defective parts must be replaced with genuine spares without delay.
- Only use genuine accessories. No liability can be accepted for accidents caused by components
from other sources.
- The operational safety of the equipment is only guaranteed if used in accordance with the
directions.
Maintenance, inspection and repairs must only be carried out by qualified specialist personnel,
-
who have acquainted themselves with the subject by studying the operating instructions.
Maintenance and care:
The electrical Lube-Compressor requires no maintenance.
Make a regular check on the pressurised components (pressure hose and lubrication gun) and also on
the live parts of the pump for possible damage.
Defective parts must be replaced with genuine spares, without delay.
Warranty:
If the operating instructions are complied with and the equipment used in accordance with the
directions, we accept liability within the bounds of the statutory warranty obligation.
When making warranty claims always attach the invoice from your dealer, giving the date of purchase.
equipment. Non-compliance with the safety instructions can lead
of the equipment must ensure that
7