Symbols - RIDGID R3101 Manuel D'utilisation

SYMBOLS

The following signal words and meanings are intended to explain the levels of risk associated with this
product.
SYMBOL SIGNAL
DANGER:
WARNING:
CAUTION:
CAUTION:
SYMBOL
Some of the following symbols may be used on this product. Please study them and learn their meaning. Proper
interpretation of these symbols will allow you to operate the product better and safer.
Safety Alert
Read Operator's Manual
Eye Protection
No Hands Symbol
Wet Conditions Alert
V Volts
A Amperes
Hz Hertz
min Minutes
Alternating Current
n o
No Load Speed
Class II Tool
.../min Per Minute
MEANING
Indicates an imminently hazardous situation, which, if not avoided, will
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, could
result in death or serious injury.
Indicates a potentially hazardous situation, which, if not avoided, may
result in minor or moderate injury.
(Without Safety Alert Symbol) Indicates a situation that may result in
property damage.
NAME
Indicates a potential personal injury hazard.
To reduce the risk of injury, user must read and understand
operator's manual before using this product.
Always wear eye protection with side shields marked to comply
with ANSI Z87.1.
Failure to keep your hands away from the blade will result in serious
personal injury.
Do not expose to rain or use in damp locations.
Voltage
Current
Frequency (cycles per second)
Time
Type of current
Rotational speed, at no load
Double-insulated construction
Revolutions, strokes, surface speed, orbits etc., per minute
5 - English
DESIGNATION/EXPLANATION