Qlima D210 Manuel D'utilisation page 74

Fig. 2
4
74
REQUIRED DISTANCE
Respect the required distance of the device to walls and other objects. See illustration 2.
CONTROL PANEL
4
3
D
C
LED INDICATORS
1. WATER FULL-LED Red
2. COMP-LED Green
3. DEFROST Green
4. TIMER-LED Orange
HUMIDITY LEVEL & TIMER 2 DIGIT DISPLAY
The indicator features 3 functions:
1. when you set the humidity, it will indicate the humidity that you have selected
2. when you program the time for the unit to turn on and off, it will show the hours.
3. When the environment humidity is lower than 35%, it will show "LO"
4. When the environment humidity is higher than 95%, it will show "HI"
PUSH BUTTON FUNCTIONS
A. Power Push Button
B. DOWN Push Button
C. UP Push Button
D. Timer Push Button
OPERATION
1. Press button once to start operation. Press it again to stop operation.
2. Press or button to set the desired humidity level in the room, which can be set
from 30% to 90% at 5% intervals. After a period of working, when environment
humidity is lower than the selected humidity by 2%, compressor will stop. When
environment humidity is equel to or higher than the selected humidity by 3%,
compressor will restart after the 3-minute compressor protection time.
3. Press button to start the timer setting. Press the button to program the time
when the unit turns on and turns off. If you want to cancel the timer programming,
press the button to adjust the time at 00, and press the button, it will be circulate
from 00-01-02......23-24.It is the programmed time to switch the machine. The
2 1
Fig. 3
B A