Accessories; Standard Accessories; Optional Accessories - Metabo HPT D 10VF Instructions De Sécurité Et Mode D'emploi

WARNING:
NOTE:
Accessories are subject to change without any obligation on the part of the metabo HPT.

STANDARD ACCESSORIES

<D10VF>
(1) Chuck wrench (Spec. only for keyed chuck) (Code No. 319529) ..................................... 1
<D10VG and D13VF>
(1) Side handle (Code No. 981205) .......................................................................................... 1
(2) Chuck wrench (Spec. only for keyed chuck) ...................................................................... 1
(Code No. 319529 ... D10VG)
(Code No. 319527 ... D13VF)
<D13VG>
(1) Side handle (Code No. 981205) .......................................................................................... 1
(2) Handle joint (Code No. 319550) .......................................................................................... 1
(3) Chuck wrench (Code No. 319527) ...................................................................................... 1
OPTIONAL ACCESSORIES ............... sold separately
<D10VF>
(1) Side handle (Code No. 981205)
(2) Hook (A) (Code No. 317676)
<D10VG>
(1) Hook (A) (Code No. 317676)
<D13VF and D13VG>
(1) Hook (A) (Code No. 317676)
(2) Angle attachment (Code No. 319528)
NOTE:
Specifications are subject to change without any obligation on the part of the metabo HPT.

ACCESSORIES

ALWAYS use Only authorized metabo HPT replacement parts and
accessories. NEVER use replacement parts or accessories which are not
intended for use with this tool. Contact metabo HPT if you are not
sure whether it is safe to use a particular replacement part or accessory
with your tool.
The use of any other attachment or accessory can be dangerous and
could cause injury or mechanical damage.
English
15