Before Your Call For Service - Sunbeam SBWC040A1S Guide D'utilisation

BEFOR YOU CALL FOR SERVICE
Problem
No Power
Cabinet Temperature
too High
Condensation on the
cabinet and/or doors
If none of the above rectify the situation, contact our customer care department
TROUBLESHOOTING
Possible Cause
A fuse in your home may
be blown or the circuit
breaker tripped.
Power surge.
Plug not fully inserted into
wall outlet
.
Temperature setting
.
Door not shut properly
or opened excessively
.
Interior lights toggled on
A large quantity of warm
bottles was recently added
to the cabinet
.
High humidity conditions
in the home
.
Door not shut properly
or opened excessively
.
10
What to do
Replace the fuse or reset circuit
.
Unplug the Wine Cooler, wait a
few seconds and then plug it back in
Make sure the 3-prong plug is fully
inserted into outlet.
Verify the temperature control setting,
adjust if neccessary
Ensure that the door is fully closed
and that the gasket is sealing against
the cabinets. Open the doors only as
needed and for short periods of time
The interior lights are intended for
.
temporary lighting of cabinets and for
display purposes only. They are not
intended to be left on for prolonged
periods of time.
same time. Attempt to stagger the
load introduction if possible
The condensation will subside once
humidity conditions return to normal.
Ensure that the door is fully closed
and that the gasket is sealing against
the cabinets. Open the door only as
needed and for short periods of time
.
.
.
.
.