Clearing Faults; Decommissioning And Disposal - EHEIM LEDcontrol Mode D'emploi

English

10. Clearing faults

Faults
Controller not recognised by the program
Lighting mode cannot be viewed in quick run-through
You have overwritten or deleted the original lighting modes
For other faults, please contact EHEIM Service.

11. Decommissioning and disposal

Storage
Store the appliance in a dry, frost-proof place.
Disposal
When disposing of the appliance, heed the respective statutory regulations. Information on the disposal of electrical and electronic appliances in the
European Union:
Within the European Union, disposal of electrically operated appliances is governed by national regulations that are based on the EU Directive
2012/19/EU on waste electrical and electronic equipment (WEEE). The appliance may no longer be disposed of with the municipal or household
waste. The appliance will be accepted free of charge at municipal collection points or recycling centres. The product packaging is made up of recycla-
ble materials. Dispose of them in an environmentally responsible manner and take them for recycling.
12. Technical data
Power
Channels
Charge per channel
Power supply
Dimensions (L × W × H)
max. 180 W controllable
5
max. 4 A
via USB connection 5 V DC or EHEIM powerLED+ 24 V DC
241 × 254 × 122 mm
Remedy
▶ Check the USB connection
▶ Push the reset button
▶ Check the USB connection
▶ Push the reset button
▶ Download at: www.eheim.com
36