Clearing Faults - EHEIM Classic LED Mode D'emploi

English
6. Maintenance
DANGER! Electrocution!
▶ Before maintenance work, remove the mains plug of the power supply unit.
CAUTION! Material damage.
▶ Do not use hard objects or aggressive cleaning agents for cleaning.
▶ Before cleaning, allow the light to cool down for a minimum of 5-10 minutes.
‧ The following sections describe maintenance work necessary for optimum and fault-free operation. Regular
maintenance prolongs the service life and secures functionality of the LED light over a long period.
‧ The LEDs are not replaceable. Once the LEDs have reached the end of their service life, you must replace
the complete LED light.
Cleaning the LED light
1. Allow the light to cool down a minimum of 5-10 minutes.
2. When required, clean the LED light with a soft, damp cloth.

7. Clearing faults

LED light does not illuminate
Possible cause
Mains plug of mains socket not connected
Remedy
▶ Insert the mains plug in the mains socket
Possible cause
LED light plug not connected to the power supply unit
Remedy
▶ Connect the plug to the socket of the power supply unit and tighten the union nut
For other faults, please contact EHEIM Service.
8. Decommissioning
Disposal
When disposing of the appliance, heed the respective statutory regulations.
The appliance may no longer be disposed of with the municipal or household waste. The appliance will be
accepted free of charge at municipal collection points or recycling centres. The product packaging is made up of
recyclable materials. Dispose of them in an environmentally responsible manner and take them for recycling.
13