Installation Instructions - Intenso MEMORY PLAY USB 3.0 Notice D'utilisation

Installation Instructions

System Requirements:
This hard drive is compatible with the operating systems MS Windows XP / Vista /
Windows 7 / 8 / 8.1 and Mac OS 10.x.
Please note: Your PC's hardware configuration as well as the operating system
employed can influence the compatibility of the hard drive.
Hard Drive Connection:
Please only use the delivered USB cable to connect the external hard disk to your TV
set or computer. For further applications of your TV set, please observe the TV set
operating manual by the manufacturer.
Connecting to a computer: The computer automatically detects the "New Device" and
installs the driver. Please wait until driver installation is completed. Your computer
now shows an additional drive named "Intenso".
As soon as the external hard disk is connected to a TV set or computer, the LED is
illuminated. The LED flashes, when writing or reading procedure is carried out.
Important notes for usage with a TV set:
- Please note that the highest possible intake capacity depends on the TV set used,
the compression procedure and the TV format (DVB or HD) and it can vary.
- Should any problems occur, please contact the manufacturer's customer support
and ask if there are any limitations for your model (software not activated for TV
recording, etc.).
Trademark: Windows XP / Vista / Windows 7 / 8 / 8.1 are registered trademarks of the
Microsoft Corporation. Macintosh and MAC are registered trademarks of Apple
Computer. All trademarks and names of third parties are property of the respective
user.
Page 3 of 4 GB