Sinmag Europe SE42 Mode D'emploi page 5

3. OPERATION
1. Move Power SWITCH to position I
2. During 3 seconds the screen displays '888'.
Litres screen
3. Select the desired volume by means of the UP and DOWN button.
DOWN
UP
4. In order to begin the measuring process, press ON key. The device will
begin to release water and the litres/gallons will be discounted. When
arriving at 0, It closes automatically the liquid passage.
5. In order to repeat the process, press up or down button to visualize the
last preselected litres/gallons. In order to begin the measuring process,
repeat points 3. and 4.
6. If during the process, for whatever reason, you desire to interrupt the
water exit, press the "OFF" button. The metering is interrupted, and the
remaining litres/gallons stay in preselection. If you wish to continue the
process, press "ON" button. If you wish to begin a new cycle, repeat
points 3. and 4
7. During the metering process you can visualize the flow in the installation,
pressing simultaneously the keys UP and DOWN. (Litres/min)
8. With the water mixer we will select the temperature of the exit water.
The mixer will open automatically or close the cold or hot water to obtain
the selected temperature by means of the mixture. On the thermometer
screen we can see the water temperature.
If the temperature of the water in the entrance changes, the mixer will correct
this variation automatically to maintain the selected water temperature
SINMAG EUROPE BVBA
ENG
OFF
ON
5