Additional Safety Information - EINHELL LH 2541 Mode D'emploi

Table des Matières

Publicité

Les langues disponibles
  • FR

Les langues disponibles

  • FRANÇAIS, page 13
Anleitung LH 2541 SPK 7
1. Important information
Please read the directions for use carefully and
observe the information provided. It is important to
consult these instructions in order to acquaint
yourself with the machine, its proper use and safety
precautions.
Keep these instructions in a safe place.
Improper operation of the electric garden refuse
shredder can lead to serious injuries.
This electric garden refuse shredder is designed only
for shredding organic garden waste.
Important!
For safety reasons, the electric garden refuse
shredder may not be operated by individuals
under 16 years of age.
Safety information
Caution! The ON/OFF switch must be set to OFF
and the power plug removed from the socket-outlet
before cleaning or doing any other work on the
shredder and whenever the cable becomes tangled.
The shredder will continue to run briefly after it is
switched off.
The shredder is not to be used by individuals
under 16 years of age or any other persons who
are not acquainted with these directions for use.
The operator is responsible for the safety of third
parties within the working radius of the shredder.
The shredder must be placed on a flat and firm
surface where it can stand securely.
Always wear gloves and safety goggles when
working with the shredder.
Each time before you leave the shredder, switch
off the motor and pull out the ignition key, spark
plug connector or power plug.
Maintenance and cleaning work on the shredder
as well as the removal or adjustment of any safety
devices may only be performed when the motor is
at a standstill and the ignition key, spark plug
connector or power plug has been pulled out.
The safety devices supplied with the shredder
(e.g. the ejector) must be used.
Before starting or switching on the motor, the
funnel inlet must be fully mounted and secure.
Ear protection is recommended.
Do not reach with your hands into the funnel inlet
or discharge opening.
09.12.2004
12:53 Uhr
Seite 9

Additional Safety information

The shredder must be assembled correctly before
it is put into operation.
Examine the shredder each time before you use it.
Do not use the trimmer if any safety devices are
damaged or worn. Never put safety devices out of
operation.
Use the grass trimmer only for the purpose
specified in these instructions.
Work only in good visibility.
Always make sure of your footing while working.
Never leave the shredder unattended at your work
place. Store the trimmer in a safe place during
interruptions.
If you interrupt your work to move to a different
position it is imperative to switch off the shredder
while you are moving there.
Never use the shredder in the rain or in moist or
wet conditions.
Protect the shredder from the damp and rain.
Always wear suitable clothing to protect your head,
hands and feet from injury. Wear a helmet,
goggles or visor, high boots or strong shoes, long
trousers made of tough material, and work gloves.
Keep the shredder away from other persons,
particularly children and pets.
CAUTION! The guard is vital for your safety
and for the safety of others, and it is also
essential for the grass trimmer to work
correctly. Failure to observe this instruction
will not only create a potential hazard, it will
also result in the loss of your rights under the
warranty.
Keep the air vents clear of dirt.
After use, unplug the machine and check it for
damage.
When you are not using the shredder, keep it in a
dry place out of the reach of children.
Check the screws regularly to see that they are
properly tightened.
The mains voltage must be the same as the
voltage specified on the rating plate.
Power cables used with the shredder must not be
of a lighter duty class than HO7RN-F rubber-
insulated flexible cables according to DIN 57282 /
VDE 0282 with a minimum diameter of 1.5 mm
Plug connectors must be equipped with earthing
contacts and the coupling must be rain-water-
protected.
Use only original replacement parts for repair and
maintenance purposes.
Have repairs carried out only by a qualified
GB
2
.
9

Publicité

Table des Matières
loading

Ce manuel est également adapté pour:

34.305.24

Table des Matières