Installing Memory Stick/SD Cards
Memory Stick and SD Cards are installed in the Memory Stick/SD Card slot. To install a Memory Stick
or SD Card, follow these steps
I
NSTALLING OR REMOVING A
SHUTDOWN OR BOOTUP PROCESS MAY DAMAGE THE CARD AND
D
O NOT INSERT A CARD INTO A SLOT IF THERE IS WATER OR ANY OTHER SUBSTANCE ON THE CARD AS
YOU MAY PERMANENTLY DAMAGE THE CARD
1
See your specific card manual for instructions on the installation of your card. Some cards may require that your
Tablet PC is off while installing them.
2
Make sure there is no card currently in the slot. If there is, see Removing a Memory Stick/SD Card.
3
Insert your card into the slot with the product label facing up.
4
Push the card firmly into the slot until it is seated in the connector.
Removing A Memory Stick/SD Card
To remove a Memory Stick or SD Card, follow these easy steps:
S
EE YOUR CARD MANUAL FOR SPECIFIC INSTRUCTIONS ON THE REMOVAL OF YOUR CARD
CARDS MAY REQUIRE YOUR
.
THEM
1
Select Safely Remove Hardware from the System Tray. Highlight the card in the list, then click [Stop].
2
Push the Memory Stick or SD Card in until it unlatches. It will then eject from the slot for removal.
:
M
S
EMORY
TICK OR
L
B
T
IFE
OOK
ABLET
85 - Memory Stick/Secure Digital Cards
SD C
ARD DURING YOUR
/
OR YOUR
,
L
B
T
PC,
YOUR
IFE
OOK
ABLET
PC
S
M
TO BE IN
LEEP
ODE OR
L
B
T
PC'
IFE
OOK
ABLET
S
L
B
T
PC.
IFE
OOK
ABLET
.
OR BOTH
. S
OME
O
FF WHILE REMOVING