Starting Your Lifebook Tablet Pc; Power On; Power/Suspend/Resume Button - Fujitsu LifeBook T5010 Guide D'utilisation

Starting Your LifeBook Tablet PC

Power On

Power/Suspend/Resume Button

The Power/Suspend/Resume button is used to turn on your LifeBook Tablet PC from its off state. Once
you have connected your AC adapter or charged the internal Lithium ion battery, you can power on your
LifeBook Tablet PC.
To turn on your LifeBook Tablet PC from its off state, slide the Power/Suspend/Resume switch, located
above the keyboard to the right. When you are done working you can either leave your Tablet PC in
Suspend mode, you can turn it off. See "Sleep Mode" on page 74 and "Powering Off" on page 77
When you power on your LifeBook, it will perform a Power On Self Test (POST) to check the internal
parts and configuration for correct functionality. If a fault is found, your LifeBook Tablet PC will emit an
audio warning and/or an error message will be displayed. See "Power On Self Test Messages" on
page 112. Depending on the nature of the problem, you may be able to continue by starting the operating
system or by entering the BIOS setup utility and revising the settings.
After satisfactory completion of the POST, your Tablet PC will load your operating system.
W
HEN YOU TURN ON YOUR
THAT AT LEAST ONE BATTERY IS INSTALLED AND CHARGED
ADAPTER IS CONNECTED AND HAS POWER
D L B
O NOT CARRY YOUR IFE
,
OR VIBRATION AS YOU RISK DAMAGING YOUR
68 - Starting Your LifeBook Tablet PC
L B T PC
IFE OOK ABLET BE SURE YOU HAVE A POWER SOURCE
.
T PC
OOK ABLET AROUND WITH THE POWER ON OR SUBJECT IT TO SHOCKS
T PC.
ABLET
, AC A
OR THAT THE OR UTO
. T
HIS MEANS
/A
IRLINE