Important Safety Instructions - Cresta KTS 966 Mode D'emploi

ENGLISH INSTRUCTION MANUAL
We thank you for buying our CRESTA KTS 966 electric footwarmer with
massage. It shows your confidence in our brand and our products. Please be
assured you have bought a high quality product which you will enjoy using for
many years to come.
If you require technical support and or have questions about the functioning
of the product please contact our After Sales Service
+ 31 900 4000030

IMPORTANT SAFETY INSTRUCTIONS

Read all instruction before using the footwarmer even if you are familiar with
this type of product.
DANGER – To reduce risk of electric shock
Always unplug from the electrical outlet immediately after using and

before cleaning.
Do not reach for an appliance that has fallen into water. Unplug

immediately.
Do not use while bathing or in a shower.

Do no place or store appliance where it can fall or be pulled into a tub

sink. Do not place in or drop into water or other liquid.
WARNING – To reduce risk of burns, fire, electric shock, or injury to
persons:
An appliance should never be left unattended when plugged in. Unplug

from the outlet when not in use and before cleaning.
To disconnect, turn control to OFF position and then remove plug from

outlet.
Close supervision is necessary when this appliance is used by, on or near

children, invalids or disabled persons.
Use this appliance only for its intended use as described in this manual. Do

not use any attachment not recommended by the manufacturer.
Never operate the appliance if it has a damaged cord or plug, if it is not

working properly, if it has been dropped or damaged, or dropped into
water. Return this appliance to a service center for examination and
repair.
Do not carry this unit by the power cord.

Do not operate under blanket. Excessive heating can occur and cause

fire, electric shock or injury to persons.
Continued operation for more than 45 minutes is not recommended.

Extensive use could lead to the product's overheating. In the event of
overheating, discontinue use and allow the unit to cool before operating.
Disconnect the power cord by holding the plug attached to the cord, not
