Onkyo DP-S1A Mode D'emploi page 60

> Before Start > Part Names
Operations while Screen Off
When set to "Disable", the side keys, such as the Volume dial and the play button (P5), will
not work while the LCD of the unit is off. Tap this to change the settings for "Volume" and
"Side Buttons".
0 When you slide the hold switch (P5) up to lock operations on this unit, operations are
according to the settings in "Operations while Holding".
Volume: "Disable" / "Enable (default value)"
Side Buttons: "Disable" / "Enable (default value)"
∫ Home
You can change the buttons displayed in the home screen to buttons for features you prefer.
0 Change the buttons displayed in the home screen from the home screen. Refer to
"Customizing the Home screen" (P26) for how to change.
∫ Power Management
Auto Display Off: The unit's LCD automatically switches off when the specified time
elapses with no operations.
Select "Off", "15 seconds", "30 seconds (default value)", "1 minute", "2 minutes", or "5
minutes".
Auto Power Off: The unit's power automatically switches to "Off" when the specified time
elapses with no operations.
Select "Off (default value)", "10 minutes", "30 minutes", or "60 minutes".
Onkyo DapController: This restricts connections between the "Onkyo DapController"
smartphone app and this unit. By setting to "Disable", the amount of battery consumed can
be reduced even when BLUETOOTH is on.
"Enable (default value)": To enable connection with "Onkyo DapController".
"Disable": To disable connection with "Onkyo DapController".
∫ Passcode
Passcode Lock: Set a four-digit pass code to protect this unit. (This is not set by default)
Change Passcode: Change the number for the set pass code. This can not be selected if a
pass code has not been set.
0 If you enter the wrong pass code three times, a message appears asking if you want to
initialize the unit's settings. Even if the settings are initialized copied music files are not
deleted.
> Initial Setup > Playback
Advanced Setup
0 You should create a pass code to protect your account if you are going to use a network
service.
∫ Language
Select the language you want to use. Flick the list of languages up or down, then tap the
language you want to use.
English, German, French, Spanish, Italian, Swedish, Russian, Traditional Chinese,
Simplified Chinese, Japanese
∫ Software Update
Update Notice: Availability of a software update will be notified via network when "Enable"
is set.
"Disable": Do not notify
"Enable (default value)": Notify
Update Now: Software can be updated via a network or via a micro SD card.
Select "via Network" or "via SD Card". You can not select if there is no software update.
∫ Device Information
Software Version: The current software version is displayed.
MAC Address: The MAC address of this unit. This value is specific to the component and
cannot be changed.
Serial Number: The unique identifier for this unit.
License: Displays a guide to our privacy policy and the licenses for open source software.
Certification (North American models only): The certificates for acquired safety standards
are displayed.
∫ Reset
Reset All Settings: The settings of the unit are initialized. Note that music files copied to the
internal storage are not deleted. Also, after resetting, the initial settings screen is
automatically displayed.
Factory Reset: Reset the unit to the condition it was in when you purchased it. Note that
music files copied to the internal storage and settings data are all deleted.
| Supplementary Information | Others
En 23