Publicité
Les langues disponibles
Les langues disponibles
Note: If you connect the earth cable directly to a minus connection and not to terminal 15, the device will remain
permanently switched on. While this is possible, it violates the terms of our warranty.
EN
We recommend installing the device in the upper third of the engine compartment since martens, due to their burro-
wing behaviour, instinctively make their way up through the engine cavity. Moreover, this facilitates installation and
ensures that all of the components are better protected from dirt.
Prior to
Function
Installation
installation
check
After installing and connecting the ultrasonic device, we recommend retesting the device to ensure that it functions
correctly. Perform the test using an ultrasonic tester (Item code. 07595). If the function check is successful but ul-
trasound is not emitted after installation, an installation error has occurred.
Blinking at regular intervals (approx. every 5 seconds) = OK: Ultrasound is being emitted.
LED off = device is switched off.
Prior to
Function
Installation
installation
check
1.
Is the operating voltage (12 V plus) of the car battery also present at the unit connection?
2.
Is the engine switched off?
3.
Does the cable to terminal 15 have any voltage? (Is the ignition switched on? If so, the device will be switched off.)
Prior to
Function
Installation
installation
check
8
Trouble
Circuit
shooting
diagram
Trouble
Circuit
shooting
diagram
Trouble
Circuit
shooting
diagram
Function control light
Ultrasonic speakers
Fuse box
Terminal 15
12 V (+)
(earth)
0.5 A F
Prior to
installation
IMPORTANT! Terms of the warranty (please keep in a safe place)!
Our Standard ultrasonic device comes with a 48-month functional warranty.
Warranty
1.
Any reasonable complaints within the warranty period from the date of purchase will be remedied free of
charge, either through repair or delivery of a replacement product at our discretion. In order for the warranty
to apply, our product must have been properly installed and maintained in accordance with our installation
instructions.
2.
To enable us respond to problems, please return the complete unit, including the cable and installation
invoice, initially at your own expense. Once the problem has been resolved, the product will be returned to
you free of charge.
3.
We are not liable for any further claims, such as costs for installing/deinstalling the unit. Any claim under Section
5 of our General Terms and Conditions shall remain unaffected, subject to the conditions set out therein.
4.
Any damage caused by improper installation or incorrect, negligent or forceful operation shall invalidate the
warranty. There shall be no liability for consequential damage.
Warranty
Technical changes and errors excepted.
Please fill in to claim against the warranty: For warranty claims to be processed, you must send us the filled in
coupon and the garage/installation invoice!
Warranty
Garage stamp
Date of purchase
Technical support hotline
+49 (0) 7631 9727-80
Service address
Norbert Schaub GmbH
Robert-Koch-Strasse 20
79395 Neuenburg am Rhein
GERMANY
Tel. +49 (0) 7631 9727- 0
Fax +49 (0) 7631 9727-27
info@stop-go.de
www.stop-go.de
Function
Trouble
Installation
check
shooting
Circuit
Warranty
EN
diagram
Unit serial number
9
Publicité
