Operation - GUTFELS LE60933we Mode D'emploi

desired room humidity has been reached, especially when the
optional HEPA filter is installed. AIR CLEAN indicator will light on at
the same time. The fan speed is adjustable in this mode.
Customer can choose HEPA_Filter_LE60933 to
this LE60933WE dehumidifier as optional for air purification
improvement. If it's needed, please contact customer service EGS
GmbH with email and telephone as followed:
Hotline für DE +49 2944 / 9716791
Hotline für AT +43 820 / 200 170
Hotline für BENELUX + 49 2944 / 9716791
Email: kontakt@egs-gmbh.de
Please Note: If using a HEPA filter while dehumidifying, the
performance of the unit may be reduced by 10%.
DISPLAY WINDOW
Displays the room temperature (0 ~ 50oC )
Ÿ
Displays the room humidity (35~95%RH).
Ÿ
Displays the set humidity, while pressing the HUMIDITY button.
Ÿ
Ÿ Displays the set time while pressing the TIMER, after 8 seconds,
return to room humidity.
ON INDICATOR (heat operation indicator)
Ÿ lights on in GREEN as the heat element is working.
Ÿ lights on in RED and blink as the unit is tipped over.
WATER FULL INDICATOR It turns to RED and blink when the water
tank is full or the tank is not in proper position.
HUMIDITY INDICATOR IN THE FRONT
This unit is equipped with an intelligent humidity display on the
front, giving the user an immediate visual indication of the ambient
humidity. The front LED's will change color to indicate the current
humidity level.
27
Blue light – room humidity > 70%
Green light – room humidity 50~70%
Red light –room humidity < 50%
☆In SLEEP mode, this indicator will not work.

Operation

1. Plug the unit into a correct mains socket. (Please refer to the
rating label at the rear of the unit.)
2. OPEN THE AIR DEFLECTOR at the top.
3. Press button POWER to turn on the unit. The unit will start to
work in LOW FAN/LOW HEAT/LOW DEHUMIDIFY (humidity
setting: 50%)
4. Press button HUMIDITY to set the room humidity you need:
continuous de-humidifying , 40%, 50%, 60% or 70% (the set
level will appear on the LED display)
5. Press button FAN SPEED to choose the ventilation speed,
MUTE, NORM (normal/standard) or TURBO.
6. Press button TIMER to set the working hour you need (1~24
hours).
7. To turn off the unit, press button POWER again.
☆
You may set the unit in AUTO mode or DRY mode, please refer
to the description in the previous page.
IMPORTANT!
1. After switching off the unit, it takes at least 2 minutes to OFF the
unit completely, which allows the heater to cool down. DO NOT
DISCONNECT THE PLUG DIRECTLY FOR QUICK-OFF.
2. Do not operate the unit without the AIR FILTER.
28
ENG