GUTFELS LE60933we Mode D'emploi page 15

NORM (standard): the unit will run at MEDIUM fan speed with
u
HIGH heat setting. And, if the ambient humidity is below set
humidity, the unit will run at Medium fan speed only, no heat.
TURBO: the unit will run at HIGH fan with HIGH Heat. And, when
u
the ambient humidity is below set humidity, the unit will run at
HIGH fan speed only, no heat.
Indicator for the set mode will light on.
AUTO BUTTON By pressing this button, the unit will work
u
automatically as below:
Ÿ Above 70% .... unit works in TURBO mode.
Ÿ Between 55% and 70% .... unit works in SLEEP model.
Ÿ Less than 55%, .... unit stops for 30 minutes before rechecking
room humidity. Will not restart until humidity is above 55%.
DRY (LAUNDRY) BUTTON (40% RH / high fan speed/high heat)
This mode is ideal for creating a great environment for drying
clothes. The unit will work for 8hrs continuously with the desired
humidity set at 40% before resting for 30 minutes. The unit will
then check the humidity of the room. If it is above 40%, the unit
will work for another 8hrs before repeating the process. If the
humidity of the room is found to be below 40%, the unit will rest for
another 30 minutes before rechecking the humidity of the room.
The LED above the button is lit when DRY (LAUNDRY) mode is
selected.
☆
Under this mode, the fan speed is always fixed at HIGH speed,
not adjustable.
HUMIDITY BUTTON Set the humidity level you need: CO
(continuous dehumidify) , 40%, 50%, 60% or 70% The set
HUMIDIFY level will show on the LED display .
Please Note:
1. After 8hrs of the heater running continuously, the unit will rest
for 30 minutes before resuming the previously selected
operation.
2. If the HUMIDITY button is not set, the unit will work at the
default setting: 50% RH /low fan speed/low heat.
25
※Continuous dehumidify mode
For safety reason, the machine will stop automatically after
running for 8hrs. After rest for 30 minutes, resumes to work.
Repeat in this cycle.
※ Continuous dehumidify mode + Ambient humidity less than 35%
the heater works for 15minutes -> rest for a few minutes, repeats in
this cycle, unless the humidity rises up.
※Ambient temperature higher than 36°C
the heater stops , the fan keeps running to check humidity (last set
mode) / temperature, then follows the general logic of stopping for
30 minutes if humidity is reached.
※Working with humidity setting: 40%, 50%, 60% or 70%
the machine will stop automatically after running for 8hours, no
matter the setting humidity is reached or not. After rest for
30minutes, resumes to work. Repeat in this cycle.
POWER BUTTON Press this button to start or turn off the machine.
Please note it may take a few minutes for the unit to turn off once
pressed.
TIMER BUTTON
1. Press TIMER button to set the working hours you need. While
pressing the button, the LED display will show the hour you set
(starting from , 1 to 24 in a cycle). The TIMER Indicator will light
on at the same time.
When the set time has been reached, the machine will turn off
automatically.
2. By pressing the timer but without turning on the other
functions, you can PRE-SET the time for the machine to work.
For example, if you press the timer to '2', the unit will turn on
automatically 2 hours after and works in the previous mode.
AIR CLEAN BUTTON This mode runs the fan without
dehumidifying the air. This is great for purifying the air when the
26
ENG