Storage; Troubleshooting; Noise Development; Technical Specifications - Proficook PC-HM 1026 Mode D'emploi

• Immediately clean the appliance after each
use.
• Only use a damp cloth for cleaning the hous-
ing.
• Dough residue sticking to the mains cable can
be removed with a cloth as well.
Accessories
WARNING: Risk of injury!
The knife of the blender stick is very sharp.
Handle with care.
CAUTION:
Do not immerse the blender stick shaft com-
pletely into water. Make sure no water enters the
shaft while cleaning it.
• Rinse the blender stick under warm running
water. Leave it in upright position afterwards for
water that might have entered to run off.
• Clean the dough hooks and beaters in warm
soapy water. They are dishwasher-safe. Make
sure not to overdose cleaning agents.
• Dry all parts thoroughly after cleaning.

Storage

• Clean the appliance as described and let it dry
completely.
• We recommend that you store the appliance in
the original packaging, should you not want to
use it for a longer period of time.
• Always store the appliance out of the reach of
children in a well ventilated and dry location.

Troubleshooting

The device is not functioning
Remedy:
Check the mains connection.
Other possible cause:
Your appliance is equipped with a safety switch.
When the blender stick is attached, the speed set-
tings will be deactivated. Please refer to. "Instruc-
tions for use" "Turning on/off".

Noise development

The sound pressure level in the ear of an operator
(LpA) was measured according to DIN EN ISO
3744.
Sound pressure level detected: approx. 80 dB(A)
(no limit)

Technical Specifications

Model: ................................................ PC-HM 1026
Power supply: .................................. 230 V~, 50 Hz
Power consumption: ..................................... 300 W
Protection class: ..................................................... II
Short term operation:................................5 minutes
Net weight: ......................................approx. 1.35 kg
The right to make technical and design modifica-
tions in the course of continuous product develop-
ment remains reserved.
This device complies with all current CE directives,
such as electromagnetic compatibility and low volt-
age directive and is manufactured according to the
latest safety regulations.

Disposal

Meaning of the "Wheelie Bin" Symbol
Take care of our environment, do not dispose of
electrical applicances via the household waste.
Dispose of obsolete or defective electrical appli-
ances via municipal collection points.
Please help to avoid potential environmental and
health impacts through improper waste disposal.
You contribute to recycling and other forms of
utilization of old electric and electronic appliances.
Your municipality provides you with information
about collecting points.
45