Technical Data; Before Starting The Equipment - EINHELL GE-LC 18 Li Mode D'emploi D'origine

case of misuse. The user / operator and not the
manufacturer will be liable for any damage or inju-
ries of any kind caused as a result of this.
Please note that our equipment has not been de-
signed for use in commercial, trade or industrial
applications. Our warranty will be voided if the
machine is used in commercial, trade or industrial
businesses or for equivalent purposes.

4. Technical data

Motor power supply: ............................... 18 V DC
Idle speed n : ......................................2400 min
0
Battery charger output voltage: .............. 21 V DC
Battery charger output current: ....................... 3 A
Charging unit supply voltage:
............................................. 200-250V~ 50-60Hz
Battery type: ............................................... Li-Ion
Number of battery cells: ................................. 10
Battery capacitance: .................................... 3 Ah
Cutter rail length ...................................... 250 mm
Max. cutting length: ................................ 230 mm
Cutting speed at rated rpm: ......................4.3 m/s
Oil tank capacity: .......................................200 ml
Weight with cutter rail + chain + battery: ..............
....................................................... approx. 3.6 kg
Danger!
Sound and vibration
Sound and vibration values were measured in ac-
cordance with EN 60745-1 and EN 60745-2-13.
L sound pressure level ..................... 85,7 dB(A)
pA
K uncertainty ............................................. 3 dB
pA
L sound power level ....................... 95,4 dB(A)
WA
K uncertainty ........................................ 2,47 dB
WA
L sound power level guaranteed ......... 98 dB(A)
WA
Wear ear-muff s.
The impact of noise can cause damage to hea-
ring.
Total vibration values (vector sum of three direc-
tions) were determined in accordance with EN
60745-1 and EN 60745-2-13.
Anl_GE_LC_18_Li_Kit_SPK7.indb 25 Anl_GE_LC_18_Li_Kit_SPK7.indb 25
GB
Handle under load
Vibration emission value front handle
a = 4,88 m/s
2
h
Vibration emission value rear handle
a = 4 m/s
2
h
K uncertainty = 1.5 m/s
The specifi ed vibration value was established in
accordance with a standardized testing method. It
may change according to how the electric equip-
ment is used and may exceed the specifi ed value
in exceptional circumstances.
The specifi ed vibration value can be used to
-1
compare the equipment with other electric power
tools.
The specifi ed vibration value can be used for initi-
al assessment of a harmful eff ect.
Keep the noise emissions and vibrations to a
minimum.
•
Only use appliances which are in perfect wor-
king order.
•
Service and clean the appliance regularly.
•
Adapt your working style to suit the appliance.
•
Do not overload the appliance.
•
Have the appliance serviced whenever ne-
cessary.
•
Switch the appliance off when it is not in use.
•
Wear protective gloves.

5. Before starting the equipment

Warning!
Always remove the battery pack before making
adjustments to the equipment.
Danger! Do not fi t the battery until the chainsaw
has been fully assembled and the chain tension
has been set. Always wear protective gloves
when working on the chainsaw to protect yourself
against injury.
5.1 Assembly of the cutter rail and the saw
chain
•
Carefully unpack all parts and check that they
are complete (Fig. 2-3).
•
Undo the fixing screw of the chain wheel co-
ver (Fig. 4).
•
Take off the chain wheel (Fig. 5).
•
Lay the chain as shown in the groove which
runs around the cutter rail (Fig. 6a/Item A).
- 25 -
2
04.04.16 09:28 04.04.16 09:28