Basic XL BXL-JC10 Mode D'emploi page 4

Step two
Press down the battery buckle with your hand (as shown in 3, and remove the battery cover).
Battery buckle Big opening.
Insert 4 pieces of 1.5 V AA batteries as per the correct polarity (positive or negative symbols are
shown on the battery cover and the + symbol is the positive polarity of the battery).
Step three
Replace the battery cover and observe the correct direction of the battery cover (The smaller opening
of the battery cover should be against the battery buckle. Place the bigger and smaller openings
properly onto the battery cabinet and press down the middle part, ensuring that the two buckles in the
middle are in place).
Step four
Push the battery cover outward, remove it and insert 2 pieces of 1.5 V AAA batteries as per the correct
symbols of polarity (correct symbols of positive and negative polarity are shown inside the battery box
and the + symbol is the positive polarity of the battery).
1. Buckles
2. Upper cover
1. Battery cover
2. Battery
3. Battery buckle
4. Buckle
1. Battery cover
2. Battery buckle
3. Battery buckle
4. Big opening
5. Small opening
6. Battery cabinet
4