Basic XL BXL-JC10 Mode D'emploi page 2

JUMPING CLOCK
Main functions
• Perpetual calendar (2000-2099), with display of time, date and day of week, shift between 12-hour
and 24-hour systems
• Temperature: Shift between Centigrade and Fahrenheit temperature scales (0~50°C, 32-122°T)
• Alarm with chords/rotary alarm/snooze functions
• Jumping perpetual calendar
• Countdown function
Initial time mode:
The product is in time mode at the beginning when powered up and displays a time of 0:00 for the
24-hour system. The initial date is January 1 (initial year is 2010). The temperature is in degrees
Celsius and the alarm and snooze functions are disabled.
Setting of time, year, month and day:
1. In time mode, press the SET key for 3 seconds to enter time setting, and the hour starts flashing.
Press the UP or DOWN key to adjust the hour, and press the SET key again, then the UP or
DOWN key to adjust the minute, year, month and day. Press the SET key again to return to normal
time display (the week will automatically change when setting the date).
2. To exit the setting mode, press the MODE key or do not press any key for 1 minute.
Shift between 12-hour and 24-hour modes:
In time mode, press the UP key to shift between 12-hour and 24-hour modes.
Alarm and snooze functions:
In time mode, enable the alarm ring and snooze functions via the DOWN key and press it again to
disable the function. The symbols displayed are (((□))) for alarm ring and Zz for snooze. In normal time
mode, no alarm ring or snooze symbol indicates that alarm ring and snooze have been disabled. If the
alarm ring and snooze symbols are not displayed, the alarm ring does not go off when the set time is
reached. Meanwhile, if the alarm ring symbol only is displayed, the snooze function is not available. If
both functions are required, the alarm ring and snooze symbols should be displayed simultaneously.
In time mode, press the MODE key once to enter alarm mode (with ALARM symbol).
Press the SET key for 3 seconds and the hour starts flashing. Press the UP or DOWN key to adjust
upwards or downwards, and press the SET key briefly to coordinate with the UP or DOWN key to
adjust the minute. To return to time mode, press the MODE key twice or do not press any key.
When the alarm clock reaches the set time, the chords start playing, the product starts rotating and the
coloured lamp starts giving out dynamic and coloured light. It stops automatically after one minute. In
case any keys are operated, the alarm ring stops. When the snooze function of the product is activated,
the chords will play, the product will rotate and the coloured lamp will give out dynamic and coloured
light again after 5 minutes (it will show the snooze state and can be snoozed 3 times). It stops
automatically after one minute. In the snooze state, press SET to stop snoozing.
Timer Mode:
In time mode, press the MODE key twice to enter countdown mode. The default time display is
0:00:00.
Press the SET key for about 3 seconds to enter the setting, and the hour starts flashing. Press the UP
or DOWN key to adjust the hour upwards or downwards, and press the SET key again, then the UP or
DOWN key to adjust the minute and second, and finally press the SET key again to confirm.
ENGLISH
2