Icy Dock ICYRaid Mode D'emploi page 5

3. Insert the hard drive in the correct position, insert the drive by slowly pushing
the drive in and closing the front door panel at the same time.
4. Push to close the front panel until a
"click" sound is audible, indicating
the panel is locked in securely.
Note: Always ensure enough airflow around the enclosure for best performance.
SATA 7 + 15 PIN
connector
5. Connect the power adapter to the
unit. Plug the included USB 3.0
cable to the unit and other end to
PC or Mac.
( Note: the default mode is
preset to JBOD mode. To change RAID
modes, please refer to Section 5 - Using
the RAID Mode.)
USB 3.0 Cable
Power Adapter
English
3