•
For fine adjustment of the focus, use the gear wheel
tance of the microscope head to the object, this will ensure an optimally
sharp image.
•
Modify the dioptric adjuster
Utilisation with articulated arm
Assembly of the articulated arm
The articulated arm can be both firmly screwed at a fixed position or, by
means of the clamp mounting, be flexibly locked at the workplace. In each
case select a sturdy, level and smooth area for the assembly.
Permanent fixing of the articulated arm
For a permanent fixing of the appliance, careful selection of the precise
workplace is important, as the working surface will be drilled directly.
•
At the desired assembly position mark the four boreholes at a distance of
45mm from each other, then drill the holes for the supplied screws.
•
Mount the screw flange on the work surface with the 4 supplied
woodscrews.
•
For a simplified assembly you can dismantle the flange from the articulated
arm. For this, unscrew both hexagon socket screws sidewards from the
flange and then pull it from the swivel of the articulated arm.
A suitable spanner is supplied in the carton for the table clamp.
w to meet your personal requirement.
(Model 33263)
- 19 -
t to adjust the dis-