Bruder Mannesmann Werkzeuge 99448 Notice D'utilisation page 16


Pay special attention, when measuring
currency of:
- Direct current (DCV /
- Alternating current (ACV / ~) over 30 V

Do not touch any grounded parts during
measuring (pipes, radiators, etc.)

When measuring resistors or diodes, no
external voltage may reach the entry-
hubs. Before starting your job, discon-
nect mains-operated units from the
power-supply or remove the battery from
battery-operated test-objects.

Avoid any shocks, influence of humidity
and dust and do not expose to the sun.
Pay attention not to exceed the max.
working-temperature, in order to avoid
blackening of the display-background.

For cleaning the instrument you may use
a clean brush or cloth. (Do not use any
cleaning-liquids or solvents!) Do not let
any liquids enter the interior of the
instrument.

Always switch-off the instrument after
having finished your measures.

Before storing the instrument for a
longer period, remove the battery from
the instrument (danger of leakage) and
store the instrument at a dry and safe
place out of the reach of children.
Alternating voltage (ACV / V~)

Connect the black cable to "COM"-hub
and the red measuring-cable to the "V"-
hub.

Position the center-switch in the area
"V~" to the required range. If the
expected measured value is unknown,
you have to start by using the highest
) over 60 V