Digital 3220 Série Guide D'installation page 15

10
Creating server utility and device driver diskettes
If desired, you can create the required diskettes from
Windows-based workstations using these procedures:
1. Locate the Quick Launch bootable CD-ROM disc in your
ServerWORKS software kit. Insert the disc into the CD-
ROM drive.
2. From the Start Menu, select Run qlaunch.exe from the
root directory of the CD-ROM disc. The program will
start automatically if Windows 95 or Windows NT V4.0
and greater are installed.
3. Select the Installations & Utilities button.
4. Choose either the Create Diskettes tab or the Utilities
tab. Utilities is the default. If you choose Create Disk-
ettes, first select a model, then a network operating
system and its version. Select Continue. If you choose
Utilities, select a server model to see the utilities for
that server.
5. Select the utility or driver you want, then select
Continue.
6. Insert a formatted, high density diskette into Drive A
and select Continue.
NOTE
For more information, refer to the ServerWORKS Quick
Launch Getting Started guide and the on-line help in the
ServerWORKS Quick Launch program.
Installation Guide
The following is a list of device drivers you might need:
SCSI—enables your server to operate using the on-
board SCSI controllers.
Video—enables your server to operate using the on-
board video controller or other supported video cards.
RAID—enables your server to operate using a RAID
controller.
Network—choose from several device drivers for
DIGITAL supported network interface cards.
The following is a list of bootable server utilities:
RAID—enables you to make a bootable RAID configura-
tion utility diskette for use when configuring your
RAID array.
Diagnostics—enables you to make bootable diskettes
for use when troubleshooting your server.
BIOS Upgrade Utility—enables you to update and
restore your server's BIOS.
System Identification Utility—enables you to update
the server model name if you add another processor.
15