Digital 3220 Série Guide D'installation page 13

8
Run the Quick Launch CD-ROM program
Use the Quick Launch bootable CD-ROM disc to complete
the server installation. Follow these steps to configure your
DIGITAL Server and install an operating system.
NOTE
The minimum requirements to run Quick Launch are
16 MB of RAM, a hard disk drive, mouse, keyboard, moni-
tor, network card and a CD-ROM drive.
Installation Guide
1. Locate the Quick Launch bootable CD-ROM disc in your
DIGITAL ServerWORKS software kit. Power on your
server to boot from the CD-ROM.
2. Choose your language from the selections available.
3. When prompted, you can create an MS-DOS partition
size appropriate for your operating system. You are
prompted to confirm your choice. Note that Windows
NT requires a partition size of 35 MB. Novell NetWare
operating systems require 30 MB.
The Quick Launch main screen is displayed.
4. Select Installations & Utilities from the Quick Launch
main screen.
5. Choose the Express tab to install Windows NT or
the NetWare operating system automatically.
6. Select the operating system icon and a version and
press Continue.
Continue with the next page to supply the information
requested.
The Create Diskettes tab allows you to create the utili-
ties and driver diskettes required when installing SCO
UNIX or OS/2 operating systems.
Refer to the ServerWORKS Quick Launch Getting Started
guide included with the ServerWORKS software kit for
additional information.
13