Alesis WILDFIRE15 Guide D'installation Rapide page 2

Quick Start Owner's Manual (English)
Input Display
Program Up/Down
Fuse FOOTSWITCH UP/DOWN INPUTS
Power Cord
1. Make sure all items listed on the front of this guide are in the Wildfire's box.
2. Read the Important Safety Instructions document included with the Wildfire.
3. Study the Hookup Diagram below.
4. Make sure all equipment is turned off and all gain knobs are set to zero.
5. Connect your guitar and other equipment to the Wildfire in the manner illustrated below. Refer to the
Features section for details on which cables and equipment to use.
6. Plug in all devices and turn them on.
7. Experiment with the Wildfire's effect combinations. Refer to the Effect Quick Reference on the next page.
8. When finished, turn off the amp before disconnecting any equipment to prevent damage to the speaker.
9. Go to http://www.alesis.com to register the Wildfire.
VALUE Knob
EFFECT Knob DRIVE Knob
EXPRESSION PEDAL INPUT
Quick Setup for the Wildfire
Wildfire Hookup Diagram
Front Panel
Expression
Pedal
Rear Panel
CD
Player
Footswitches
BASS Knob MASTER VOLUME Knob
TREBLE Knob
AUX INPUT SPEAKER OUTPUT
STEREO LINK OUTPUT
Amp
Power Switch
HEADPHONES Jack
Note:
Wildfire 60 is
pictured. Some
of the front
panel features
are not found
on the Wildfire
15 and 30.