Changing The Roller - Eurotops AP-3WD Mode D'emploi

4. Insert two new 1.5 V batteries of the AA type. Pay attention
5. Place the battery compartment cover back on the battery

Changing the Roller

■
■
1. Remove the protective cap (1).
2
3. Pull the roller (9) out of the holder.
4. Using your fi nger, press the new roller (9) out of the protec-
01306_DE-EN-FR-NL_A6_V1.indb 25 01306_DE-EN-FR-NL_A6_V1.indb 25
to the correct polarity (+ / –).
compartment and turn it counter to the direction of the ar-
row to shut it.
CAUTION!
A damaged / worn roller can cause injuries to the skin and
must be replaced.
Make sure that the device is switched off before changing
the roller.
Depending on the thickness of the callus, the appropri-
ate roller (9) must be used. To remove thick calluses
(e. g. on your heels), use the coarse black roller. To re-
move dry and thin callus areas, use the fi ne grey roller.
2. Hold the device so that the roller cap (2)
1
points upwards and slide the release
switch (3) downwards. The roller (9) will
"spring" out.
tive sleeve and hold the roller cap (2) between the fi ngers
of your other hand.
25 EN
02.11.2017 10:39:05 02.11.2017 10:39:05