Safety Precautions - Horotec FLASHTEST MSA 19.108 Mode D'emploi

The precision of the measurement increases with the size of the amplitude of the selected signal. In this menu, the
signal strength level is shown at the bottom of the LCD screen in the form of a percentage (%). It is recommended
to tune it to the maximum possible value through the manipulation of the positioning of the watch
Once the maximal tuning has been reached, start a new measurement of the precision of the watch by pressing
down the right button (ON) for few seconds.
• Set the Accuracy menu and the display shows the words ACCURACY and DETECT.
• Place the watch on the "Quartz Analogue Watch" zone. After a few seconds the display shows ACCURACY
66 WAIT sec/pulse. The displayed number (66, 65, 64, 63, ...) countdown every second continuously. After
66 seconds the display shows the accuracy value in sec/day (e.g. -1,75sec).

SAFETY PRECAUTIONS :

The contents of the operating manual are protected by copyright law. Reproduction, and using its elements without the
written consent of the manufacturer and the importer is prohibited by law.
Before you use the HOROTEC
performances and longer service life for your devices. Save all manuals and documentation for future reference.
The manufacturer reserves the right to modify or update the information contained in this guide
CAUTION
DANGER OF ELECTROCUTION
DO NOT OPEN
CAUTION TO REDUCE THE RISK OF ELECTRICAL SHOCK, DO NOT REMOVE COVER.
NO USER SERVICABLE PARTS INSIDE.
14
Flashtest product, read all operating instructions because it can provide optimum
©
CAUTION !
RISK OF ELECTRIC SHOCK !
DO NOT OPEN !
CAUTION TO REDUCE THE RISK OF ELECTRICAL
SHOCK, DO NOT REMOVE COVER
NO USER SERVICABLE PARTS INSIDE.