Machine Description - Carat CARACOUP Série Mode D'emploi

A Machine model
B Item
C Serial number
Power supply
D
voltage
Power supply
E
frequency
F Current absorption
Installed power
G
rating
Tool rotation
H
speed
I Class of protection
L Starter capacitor

4. Machine description

The CARACOUP site cutter is a machine intended
specifically for cutting ceramics, single-fired items,
terracotta, and marble (Max thickness 20 mm), up
to a thickness of 40 mm.
The machine uses a wet diamond tipped tool cutting
system and is intended for personnel specialized in
the construction sector.
The operator works in front of the narrow side of
the machine, within reach of the operating controls,
and positions the material to be cut on the moving
worktop. He/she starts the machine and moves the
cutting head to bring the tool into contact with the
material.
5. Signs
Symbols and signs:
Danger/prohibition stickers are applied to the
machine where necessary. Look at these prior to
using the machine.
A
Use of prescribed PPE
obligatory (Safety eyewear and
earmuffs)
A
Read
before each use.
M IP Level
Year of
N
manufacture
O Max tool diameter
Internal tool
P
diameter
Q Accessories
R Accessories
Manufacturer's
S
name
Manufacturer's
T
name and address
Certification Marks
U
operating instructions
A
C
D
B
B
B
2
B
17
Warning!
Recovery tank
water level
Warning! Secure the
carriage
Cut setting 45°
Do not use sector
discs
Tool diameter
measurements
D
C
A
GB