Noises - AEG S73100KDW0 Notice D'utilisation

36 www.aeg.com
WARNING!
Reposition, level the appliance,
wait for at least four hours and
then connect it to the power
socket.
Do a final check to make sure that:
• All screws are tightened.

8. NOISES

There are some sounds during normal
running (compressor, refrigerant circula-
tion).
OK
SSSRRR!
• Use a small screw driver to remove the
• Install the handle on the opposite
• Raise the appliance and install the
• Put the cabinet in position.
• The magnetic seal adheres to the cab-
• The door opens and closes correctly.
If the ambient temperature is cold (i.e. in
Winter), the gasket may not fit perfectly
to the cabinet. In that case, wait for the
natural fitting of the gasket.
SSSRRR!
bushing on the top of the door and
move it to the opposite side on the
door.
side.
ventilation grille.
inet.
HISSS!
BRRR
!