Warranty; Accessories And Spare Parts; Eu Declaration Of Conformity; Technical Data - Kärcher HV 1/1 Bp Mode D'emploi

Customer Service department
If the malfunction cannot be corrected, the device must
be checked by the Customer Service department.

Warranty

The warranty conditions issued by our relevant sales
company apply in all countries. We shall remedy possi-
ble malfunctions on your appliance within the warranty
period free of cost, provided that a material or manufac-
turing defect is the cause. In a warranty case, please
contact your dealer (with the purchase receipt) or the
next authorised customer service site.
(See overleaf for the address)

Accessories and spare parts

Only use original accessories and original spare parts.
They ensure that the appliance will run fault-free and
safely.
Information on accessories and spare parts can be
found at www.kaercher.com.

EU Declaration of Conformity

We hereby declare that the machine described below
complies with the relevant basic safety and health re-
quirements in the EU Directives, both in its basic design
and construction as well as in the version placed in cir-
culation by us. This declaration is invalidated by any
changes made to the machine that are not approved by
us.
Product: Dry vacuum cleaner
Type: 1.394-xxx
Currently applicable EU Directives
2006/42/EC (+2009/127/EC)
2009/125/EC
2011/65/EU
2014/30/EU
Harmonised standards used
EN 50581
EN 55014-1: 2017
EN 55014-2: 2015
EN 60312-1: 2017
EN 60335-1
EN 60335-2-69
EN 61000-3-2: 2014
EN 61000-3-3: 2013
EN 62233: 2008
National standards used
-
Harmonised directive(s)
666/2013
The signatories act on behalf of and with the authority of
the company management.
H. Jenner
Chairman of the Board of Management
Documentation supervisor: S. Reiser
Alfred Kärcher SE & Co. KG
Alfred-Kärcher-Str. 28 - 40
71364 Winnenden (Germany)
Ph.: +49 7195 14-0
Fax: +49 7195 14-2212
Winnenden, 2019/10/01
8
S. Reiser
Director Regulatory Affairs & Certification
English

Technical data

Electrical connection
Battery pack nominal voltage
Protection class
Device performance data
Tank content
Air quantity (max.)
Vacuum (max.)
Dimensions and weights
Typical operating weight
Length x width x height
Diameter of the suction hose
Length of the suction hose
Ambient conditions
Ambient temperature
Determined values in acc. with EN 60335-2-69
Sound pressure level L
pA
Uncertainty K
pA
Hand-arm vibration value
Uncertainty K
Subject to technical modifications.
HV 1/1
Bp
V 18 DC
III
l 0,9
l/s 33
kPa 4,7 (47)
(mbar)
kg 1,8
mm 313 x
115 x
315
mm 35
m 1,5
°C 0/+40
dB(A) 69
dB(A) 1
2
m/s <2,5
2
m/s 1