iCES IMP-100 Mode D'emploi page 8

F. LED Light Function
 Playing mode
 Pause mode
 PC connecting mode
 In charging Mode
 Charging completed
 Low battery < 20%
G. Insert Micro SD Memory Card
This player allows you to play supported media files from a Micro SD memory card.
This will increase the mobile hard-disk memory capacity of the player if you use
this option.

Turn OFF the player and then insert the memory card into the player's
memory card slot; make sure the memory card is firmly and correctly inserted.

Now you can turn ON the player, the player will read and search the supported
music files from the memory card/internal memory, once the music is found
the music will play automatically.

Before removing the memory card from the player, please turn OFF the player.
H. Resetting the Player
In some circumstances, the device may encounter technical issues during use. This
device has been designed with a built-in a mini tact switch through a hole which
located on the right side of the device..
To Reset:
 Use a 0.8 ~ 1 mm stick or similar object (like a toothpick), and carefully insert
into the reset hole.
 Apply a small bit of force and you will get a click sound and feeling from the
switch. The device is reset and will restart.
I. Troubleshooting
Player cannot turn ON
No sound is heard
Upload/Download of
music files fail.
: Blue light will flash once per second.
: Blue light will flash once every two seconds.
: Blue light will flash when data is transferring.
: Red light will flash once per second. (In charging)
: Red light will flash once per second. (In charging)
: Red light constant.
: Red light flashing.
 Check whether the battery has enough energy.
 Charge the battery.
 Check whether the Volume is set to "minimum" and
connect the headphone plug firmly.
 Check whether the headphone plug is dirty.
 Corrupted WMA/MP3 files may make a static noise
and the sound may cut off. Make sure that the music
files are not corrupted.
 Check whether music file formats are supported.
 Check whether the player's USB connector is
connected with the computer properly.
8